Nomura HBA-135P-R5

Stock USA

HBA-135 Series CNC Table Type Horizontal Boring and Milling Machine

5.3" spindle diameter

Oversized large diameter ball screws and feed motors

Nitrided hardened, ground and hand-lapped spindle (HRC 67+)

Extra-large spindle bearings with oil-mist cooling device

Full CNC controlled B axis rotary table with double warm

Three ranges of geared-headstock with 60HP spindle motor (2,930 Ft. Lbs)

The bed, the saddle, the column and the table are of high grade FC 300 iron

All the slideways are hardened and ground

The mating surfaces are coated with a fluorine-resin and forced lubricated

Rigid Bed and Saddle

ATC Magazine

Hand Scraped Slide Ways

Nose Type head stock, extra reach to work piece

Built-in Chip Conveyor

Operator-Friendly Controller (Fanuc)

Manufacturer	Normura
Model	HBA135P-R5
Condition	New
Stock Number	110
Spindle Diameter	5.31"
Spindle Speed	3,000 rpm
Spindle Taper	7/24 Taper No 50
Max. Spindle Torque	2,922 ft-lbs
Max. Spindle Thrust	6,609 lbs
X Axis (table cross traverse)	118.1"
Y Axis (headstock vertical travel)	90.5"
Z Axis (column longitudinal travel)	55.1"
W Axis (spindle travel)	27.5"
Table Size	70.8" x 78.7"
Max. Load on Table (uniformly distributed load)	33,000 lbs.
Min. Command Indexing Angles on Table (B Axis)	0.001 deg.
Rapid Traverse of X,Y and Z Axes	393.7"/min
Rapid Traverse of W Axis	236.2"/min
Feed Rate	0.004"/min~196.8"/min
Table Rotation Speed	500 deg/min
Spindle Drive Motor	60 HP
Machine Height	182"
Required Floor Space	265" x 285"
Machine weight	83,800 lbs