Bed type precision milling machine FM-200N
Contact us for price
Description
The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference.
Specifications
| Model | FM-200N |
| Condition | New |
| Working surface | 1400 x 450mm (55-1/8" x 17-11/16") or 1600 x 450mm (63" x 17-11/16")(opt.) |
| T-slots (size x number x pitch) | 18mmx3x100mm (0.708" x 3 x 3.937") |
| Max. table load | 1000kgs (2210 lbs) |
| Longitudinal travel (X axis) | 1000mm (39-3/8") or 1200mm (47")(opt.) |
| Cross travel (Y axis) | 550mm (21-5/8") |
| Vertical travel (Z axis) | 600mm (23-5/8") |
| Distance from spindle end to table | 100 ~ 700mm (3-15/16" ~ 27-9/16") |
| Distance from spindle center to column | 570mm (22-7/16") |
| Spindle nose taper | NT40 |
| Spindle speeds | 75 ~ 3500 r.p.m. (60HZ) (10 steps) or vari 55 ~ 3600 r.p.m. ; High/Low (Inverter)(opt.) |
| Quill travel | 140mm (5-1/2") |
| Quill dia. | Ø105mm (4-1/8") |
| Quill feeds per revolution of spindle | 0.04 / 0.08 / 0.15 mm/rev. (0.0015" , 0.0030" , 0.0059") |
| Swiveling angle of head (R&L) | 45° |
| Cutting feed rate | 1 ~1500mm/min (max.)(3 axes) |
| Rapid traverse | 1.8m/min (max.)(3 axes) |
| Spindle drive motor | 3.75KW (5HP) |
| X, Y axes motor | AC servo 0.75KW |
| Z axis motor | AC servo 0.75KW |
| Coolant pump | AC 1/8 HP |
| Machine size | 3150 x 2350 x 2650 mm (124" x 92-1/2" x 104-5/16") |
| Machine weight | 3300kgs (7293 lbs) |