618e Digital Threading Toolroom Lathe

Description

Super-precision toolroom lathe with Digital Threading Control is driven by a smooth 3 HP frequency controlled motor that runs virtually vibration free and extremely quiet. Easy to use LCD touchscreen to simplify threading operations by selecting target TPI or mm pitch on the screen. DRO capabilities are built-in as standard. By eliminating the traditional threading gearbox, Victor 618e toolroom lathe is easy to maintain, yet provides superior accuracy and performance.

Digital Threading operations are microprocessor controlled and carried out by synchronized spindle speed and servo motor driven leadscrew

LCD touchscreen to select thread pitch (TPI or mm) with no gears to change

DRO functions integrated into LCD panel features linear scales on X & Z axis

Infinitely variable spindle speeds from 50 ~ 4,000 rpm

The spindle is mounted in high precision preloaded angular contact ball bearings

Hardened and ground alloy tool steel bed ways

Full bearing carriage with Turcite-B slideway bearing material between carriage and bed

Fast lever collet chucking with a single movement

Independent infinitely variable feeds control on carriage and cross slide

Automatic thread length control with fine adjustable stops for accurate threading

Quick-action tool post slide for threading is instantly cleared from work

5C lever type collet closer standard

3 HP frequency controlled motor (inverter drive)

STANDARD ACCESSORIES:

LCD touchscreen with digital threading system

DRO functions integrated into the LCD touchscreen

Variable frequency drive

5C lever type collet closer

Tool holder

Tailstock

Coolant system

Halogen work light

Chuck cover with limit switch

Leveling screws and pads

Manual and parts list

OPTIONAL SPECIAL PACKAGE INCLUDES:

6" adjustable 3-jaw chuck with 4º taper back plate

Chip and coolant shield (High impact resistance Lexan polycarbonate resin)

OPTIONAL ACCESSORIES:

Tool setting gage

5C collet fixture plate

Chip and coolant shield

Vertical cut-off slide

Steady rest

Follow rest

Face plate

Angle plate

Taper attachment

Radius turning attachment

6" zero-set 3-jaw scroll chuck with 4º taper back plate

6" 4-jaw independent chuck with 4º taper back plate

Micro carriage stop with indicator

4-position indexable tool post

Rear tool holder slide assembly

Step chuck and closer

Threaded positive stops

Universal collet stop

5C collet set

Fixture plate

5C headstock center

Drive plate

Drive dog

Expanding collet and pads

Knurling holder

Turning & facing holder

Drilling & boring bar holder

6-station turret

Bed length indicator

Live center

Quick change tool post

Specifications

Model	618e
Condition	New
Type	Super-Precision Digital Threading Control Toolroom Lathe
With jaw chucks	6"
With expanding collets	3"
With round 5C collets	1-1/16"
With hexagon 5C collets	7/8"
With square 5C collets	3/4"
With step chucks	1-1/16" to 6"
Spindle nose diameter	2.189"
Spindle nose I.D. / O.D.	5C / 4° taper
Hole through spindle	1-1/4"
Variable spindle speeds	0 ~ 4,000 rpm (5C Collet) 0 ~ 3,000 rpm (6" 3-Jaw Chuck)
Swing over carriage	9"
Distance between center	18"
Swing over cross slide	6"
Swing over bed	11"
Carriage power feed range	5/16" ~ 7"
Cross slide power feed range	3/16" ~ 4"
Cross slide travel	6"
Quick-action compound slide travel	0.1"
Compound slide travel	3"
Inch threads	3.175 ~ 500 TPI (digital threading system)
Metric threads	0.55 ~ 6.55 mm (digital threading system)
Tailstock spindle diameter	1.358"
Tailstock spindle taper	M.T. 2
Tailstock spindle travel	3-3/4"
Inverter spindle motor	3 HP 220V 3PH
Coolant pump	1/8 HP
Feed inverter motor	1/2 HP
D.C. feed motor	110V, 70W
Machine dimensions (LxWxH)	73"x30"x67"
Gross weight	2,640 lb.

Documents

302-pdf