DW-35
Contact us for price
Specifications
| Model | DW-35 |
| Condition | New |
| Work-Tank size (W x D x H) | mm 930x530x550 |
| Work table size (X x Y) | mm 690x430 |
| X x Y axes travel | mm 450x350 |
| Z axis travel (by AC Motor) | mm 400 |
| U x V axes travel (under 50mmH.) | mm 30x30 |
| Max. work-piece thickness | mm 400 |
| Max. work-piece size (W x D x H) | mm 400x350x400 |
| Max. work-piece weight | kgs 250 |
| The wire bobbin travel | mm 180 |
| Dia. of molybdenum wire | mm Ø0.18 |
| Maximum taper angle | Degree 6 degree under 50mm high |
| Packing dimensions (W x D x H) | mm 775x730x1,940 |
| Net weight | kgs 200 |
| Capacity of dielectric fluid | l 100 |
| Dielectric fluid tank size (W x D x H) | mm 1000x290x340 |
| Machining average current | A 5 |
| Cutting speed | mm2/min 100~180 |
| Cutting accuracy | mm ±0.015 |
| Best finish roughness | µm RA 1.0 |
| Max. power consumption | KVA 3.0 |
| External dimensions (W x D x H) | mm 660x610x1,700 |
| Circuit system | Power MOS transistor |
| Average output current | 5A |
| Voltage select | Automatic switching. |
| IP select | 1-10 steps |
| Off time select | Automatic switching. |
| Data input | USB, RS-232C, internet. |
| Positioning display | 15" LCD TFT |
| Cutting data display | 5" LCD TFT |
| Graphic function | 2D/3D display |
| Control system | Open Loop/Stepping system |
| Control axis | X,Y,U,V. (4 axes) |
| Minimum moving unit | 0.001mm |
| Minimum setting unit | 0.001mm |
| Max. command value | ±9999.999mm |
| Interpolation | Linear / Circular |
| Command system | Abs. / Inc. |
| Total AC power input | (Ø110V or Ø220V) 3KVA |