CW-40
Contact us for price
Specifications
| Model | CW-40 |
| Condition | New |
| Machining method | Submerge / Flushing |
| Max. workpiece size (W x D x H) | mm 880x500x250 |
| Max. workpiece weight | kg 550 |
| X, Y axes travel | mm 500x300 |
| Z axis travel | mm 250 |
| U, V axes travel | mm ±50x±50 |
| X-Y axes feed rate | mm/min Max. 900 |
| Best surface roughness | µm Ra 0.65 |
| Drive motor (X, Y, U, V) | AC Servo Motor |
| Wire diameter (standard) | mm Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed | m/min 0-15 |
| Wire tension | gf 200-2500 |
| Max. taper angle | degree ±15°/80 |
| Max. wire bobbin weight | kg 6 |
| Outside dimensions (W x D x H) | mm (S)1070x719x480 (F)1140x719x450 |
| Machine weight | kg 2400 |
| Tank capacity (liter) | l 830 / 420 |
| Filter element | Paper filters |
| Ion exchange resin | l 15l |
| Conductivity control system | Standard |
| Fluid temperature control (With coolant) | Auto. (optional) |
| Outside dimensions (W x H x D) | mm 600x870x1850 |
| Net weight (without water) | kg 260 |
| Circuit system | Power MOS transistor |
| Max. outpt current | A 25 |
| Voltage select | V 145 |
| IP select | 10 |
| Off time select | 50 |
| I/O device | Keyboard, RS-232C, CF CARD |
| Display type | 15"LCD-TFT |
| Control system | 32 bit, 1-CPU, closed loop software servo system |
| Control axis | X, Y, U, V, Z |
| Min. setting unit | mm 0.001 |
| Max. command value | mm ±9999.999 |
| Interpolation | Linear / Circular |
| Command system | Abs. / Incl. |
| Machining feed control | Servo / Const. Feed |
| Scaling | 0.001~9999.999 |
| Auto 2nd cut system | Re-trace and auto changed machining data |
| Machining condition memory | 0-9999 |
| Total AC power input | KVA 3Ø220V ±10% / 13KVA |